Coverage Explained

Roofing Contractor Insurance in Florida for Tile and Shingle Roofers

A close view of a roofer’s hands steadying a pneumatic coil nailer on a run of grey shingles

Florida roofing contractor insurance starts with two state rules: a state roofing license from the Department of Business and Professional Regulation and workers’ comp, which the Department of Financial Services says construction employers with one or more employees must carry. For tile and shingle roofers, the other policies follow the weight, wind and water of the work.

The Florida roofing license and where it lets you work

Florida law defines a roofing contractor in section 489.105 of the Florida Statutes as a contractor whose services are unlimited in the roofing trade, and the definition reaches all kinds of roofing, waterproofing and coating, including a roof covering replacement or repair. Tile and shingle work both sit inside that definition.

The Florida Department of Business and Professional Regulation describes two paths to the license. A certified contractor holds a certificate of competency issued by the department and is allowed to contract in any jurisdiction in the state. A registered contractor meets the competency requirements of a local jurisdiction, and the department says registered contractors may contract only in such jurisdictions.

That difference matters for insurance because the policy should describe the same territory the license allows. A registered roofer in a single county and a certified roofer running crews from Pensacola to the Keys are different accounts, and the application should say plainly where the work happens. The post on whether roofing contractors need a license explains how licensing and insurance fit together across states.

The construction rule for Florida workers’ comp

Florida draws a sharp line for construction. The Florida Department of Financial Services says employers conducting work in the state are required to provide workers’ compensation insurance, and for the construction industry it sets the bar at employers with one or more employees, including the owner of the business who are corporate officers. Non-construction employers are measured differently, which is why a roofer cannot rely on what a friend in retail was told.

The department also says exemptions are available to business owners who opt out of the insurance coverage protections for themselves. Read that carefully: an exemption takes an eligible owner out of the coverage. It does not take the crew out. A Florida roofing company with an exempt owner and employees on the roof still needs a policy for those employees. The post on whether you need workers’ comp for your roofing crew walks through employees, subcontractors and owners in more detail, and the workers’ compensation coverage page explains the policy.

Subcontractors and Florida’s contractor liability rule

Tile and shingle crews in Florida can include subcontracted labor, especially in storm season. Florida law speaks to that directly. Section 440.10 of the Florida Statutes says that when a contractor sublets any part of its contract work to a subcontractor, the contractor shall be liable for, and shall secure, the payment of compensation to the subcontractor’s employees, under the terms that section sets out. The same section says a contractor shall require a subcontractor to provide evidence of workers’ compensation insurance.

In practice that turns the certificate file into a coverage tool. Before a sub’s crew steps on the roof, collect proof of a policy or a valid exemption, check it, and keep it with the job file. The Department of Business and Professional Regulation says its Construction Policy Tracking Database provides information regarding the coverage status of contractors, which gives you a way to check what a certificate says. An auditor at the end of the policy term can ask how every worker on your jobs was covered, and an uncovered sub’s payroll can end up on your bill. The post on what insurance GCs require from roofing subs shows the same paperwork from the other side of the contract.

Real-World Scenario: A Central Florida shingle contractor takes on extra re-roofs after a storm and brings in a crew from out of the area to keep up. The crew leader says the company is covered and promises to send a certificate. Weeks later, one of that crew’s workers is hurt on a job, and the certificate never arrived. The contractor learns that the claim and the audit now run through its own policy, and it rewrites its onboarding so no crew starts without verified proof.

What tile roofing adds to the file

Clay tile and concrete tile change the shape of the risk in ways a shingle-only file does not show. None of what follows is a Florida legal requirement. It is general insurance explanation of how an underwriter can read the work.

Tile is heavy. Loading it onto a roof can involve a crane, a forklift or a conveyor, and the lift itself is a moment when a load can drop onto a driveway, a vehicle or a person. Tile is also breakable, and a crew walking finished courses or stacking tile on an existing roof can crack pieces that belong to the customer. How a general liability policy answers damage to the customer’s property during the work depends on its wording, including the exclusions for property in your care and for your own work.

A tile roof also stays open longer. Old tile comes off, underlayment is replaced, battens or adhesive go down, and the tile goes back on. Every day that roof is not dried in is a day a summer storm can reach the interior. Write down your dry-in procedure, train crews on it, and keep photographs. The specialty metal and tile roofing page covers how tile operations are described to underwriters.

Florida tile and shingle roofer coverage A vertical stack of blocks for Florida tile and shingle roofers: the Certified or Registered license that sets where a roofer can bid, workers’ compensation for construction employers where an owner exemption still leaves the crew covered, verified subcontractor proof kept on file, and the tile and shingle exposures of heavy loads, open roofs and leaks after the job. A closing band says to report storm-season growth before the audit. No figures or dollar amounts are shown. Florida tile and shingle roofers: what stacks up Certified or registered The license sets where you bid Policy territory should match Workers’ comp for the crew Construction employers covered Owner exemption leaves crew in Subcontractor proof on file Verify before the crew starts Uncovered subs land on you Tile and shingle exposures Heavy loads and open roofs Leaks after the job closes Report storm-season growth before the audit finds it
The license and the construction workers’ comp rule come first, then the exposures that tile and shingle work add.

What shingle work adds, and what both share

Shingle re-roofs move fast, and speed is the exposure. More roofs in a season means more completed roofs on the books, and each finished roof carries the possibility of a leak months or years later. That is the completed operations side of general liability, and it is the part a Florida roofer should read closely. The post on whether general liability covers a roof leak explains how that coverage responds, and the residential roofing page covers the exposures of steep-slope work.

Tile and shingle work share the rest. Both put crews at height, both send trucks and trailers across the state, and both depend on tools and equipment that move between jobs. The general liability coverage page and the contractors equipment page explain those policies. Builders and property managers can also ask to be named on your policy, and the post on additional insured status for roofers explains what that request involves.

Storm season and growth during the policy term

Florida’s storm seasons can bring a surge of work in a short window. For insurance, a surge changes the facts the policy was priced on: payroll, revenue, the number of crews and the use of subcontractors. Tell your agent when the work grows, rather than waiting for the audit to find it. A policy written on last spring’s estimate does not describe a company that added crews and a second yard in the fall.

Growth after a storm can also bring work outside your usual area. Check that your license allows the jurisdiction, that your vehicles are listed, and that the contracts you sign do not ask for limits or endorsements you have not arranged.

Crew safety deserves the same attention when the pace picks up. New hands on a steep tile roof in summer heat are the workers an underwriter worries about, and a written fall protection plan, a heat plan and a short orientation for every new crew member are the records that answer that worry. The post on OSHA fall protection for roofing contractors covers what a written program can include. Keep sign-in sheets for the orientation, because a record made on the day is worth more than a promise made at renewal.

Questions to ask about Florida coverage

  • Does my policy describe tile and shingle work separately, with payroll split by the work each crew does?
  • If I hold a corporate officer exemption, are all my employees still covered?
  • How do I verify a subcontractor’s coverage, and where do I keep the proof?
  • How does my general liability policy treat damage to a customer’s tile or property while the roof is open?
  • Are cranes, conveyors and hoists listed on my equipment coverage, and who covers rented equipment?
  • What should I report to my agent when storm work increases my payroll mid-term?

The Florida location page covers the state as a whole, and the Florida cost guide explains what moves a roofing premium there. When you are ready for a review, start on the quote page.

Sources: the Florida Department of Financial Services’ workers’ compensation coverage requirements, the Department of Business and Professional Regulation’s construction industry page, and the Florida Statutes section 440.10 on liability for compensation and section 489.105 definitions. This post is general education, not legal or tax advice.

The bottom line

A Florida tile or shingle roofer works under a state roofing license and the construction industry’s workers’ comp rule. The Florida Department of Financial Services says construction employers with one or more employees must carry workers’ compensation, Florida law makes a contractor that sublets work answerable for its subcontractors’ coverage in the way the statute sets out, and the Department of Business and Professional Regulation explains the Certified and Registered license paths. Around those rules, the liability, auto and equipment policies should describe tile and shingle work as it is done. This post is general education, not legal or tax advice.

Frequently asked questions

Do Florida roofing contractors need workers’ comp?

Yes, for construction employers with employees. The Florida Department of Financial Services says construction industry employers with one or more employees, including business owners who are corporate officers, must provide workers’ compensation. It also says exemptions are available to business owners who opt out of coverage for themselves. An exemption covers the owner, not the crew, so confirm your status with the Division of Workers’ Compensation.

What is the difference between a Certified and a Registered roofing contractor in Florida?

Reach, mainly. The Florida Department of Business and Professional Regulation says a certified contractor is allowed to contract in any jurisdiction in the state, while registered contractors may contract only in the jurisdictions where their registration was issued. Which one you hold decides where you can bid, and your insurance file should describe the same territory the license allows.

Am I responsible for my roofing subcontractor’s workers’ comp in Florida?

You can be. Section 440.10 of the Florida Statutes says a contractor that sublets contract work is liable for, and shall secure, compensation for the subcontractor’s employees as that section sets out, and that a contractor shall require a subcontractor to provide evidence of workers’ compensation insurance. Collect a certificate or valid exemption from every sub before the crew starts, and keep it on file.

Does tile roofing change my insurance compared with shingles?

It can change the conversation. Tile is heavy and breakable, it is lifted onto the roof in loads, and a tile roof sits open longer while underlayment is replaced. Those facts bear on property damage during the work, completed operations exposure afterward and the equipment you use to load. These are general insurance points, so describe your tile work in writing for the underwriter.

Is there a separate rule for Central Florida roofers?

Not in the state sources this post relies on. The workers’ comp rule and the state license come from statewide sources, so an Orlando or Lakeland roofer starts from the same place as one in Miami. Counties and cities can have their own permit and local licensing requirements, and the office that issues your permit decides what proof of insurance it wants.

How do I check whether a Florida contractor has workers’ comp?

Use the state’s tracking database. The Florida Department of Business and Professional Regulation says its Construction Policy Tracking Database provides information regarding the coverage status of contractors. Check each subcontractor before work starts, keep the result with the certificate, and check again at renewal. If a record looks wrong, ask the subcontractor and the Division of Workers’ Compensation before you rely on it.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and Roofing Guard Insurance, a specialty insurance agency placing roofing contractor coverage in 48 states across a 16-carrier specialty panel. He places insurance for Florida roofing contractors, from shingle re-roof crews in Central Florida to tile installers along both coasts, and he reads the Division of Workers’ Compensation, the licensing board pages and the Florida Statutes before he explains them. This page keeps to what those official sources say and labels the rest as general insurance explanation. Connect via the Roofing Guard Insurance quote form or call 317-942-0549.

Insure your roofing operation with a CPCU-led agency

Tell us how you work — residential steep-slope, commercial and industrial low-slope and torch-down, or specialty metal and tile — and we will market it to carriers that write the roofing class.