A Colorado commercial flat roofing contractor with employees must carry workers’ comp: the Colorado Division of Workers’ Compensation says all businesses with employees operating in the state are required to have it. Licensing is handled locally, and the low-slope work itself, with open flame, hot materials and occupied buildings below, shapes the rest of the insurance program.
Colorado’s workers’ comp rule for commercial crews
The Colorado Division of Workers’ Compensation says all businesses with employees operating in Colorado are required to have workers’ compensation insurance, and that the rule applies regardless of the number of employees and whether the employees only work part-time. A commercial roofing company with a single seasonal laborer is inside the rule.
The division also says the cost of workers’ compensation insurance cannot be passed on to employees. That closes a door some owners ask about, such as deducting the premium from pay. The workers’ compensation coverage page explains what the policy pays for, and the post on OSHA fall protection for roofing contractors covers the written program that keeps the claim from happening.
On a flat roof, the fall exposure looks different from steep-slope work. Crews walk freely across a wide surface, which makes edges, skylights, roof hatches and openings for equipment the places where injuries happen. An underwriter reviewing a commercial account can ask how the crew protects each of them.
Subcontractors and owner rejections
Commercial roofing work can involve subcontracted crews for tear-off, sheet metal or labor during busy periods. The Colorado Division of Workers’ Compensation is direct about the risk: it warns that working with an employer that fails to carry the proper coverage could leave you liable for an uninsured injury.
Owners of some businesses can reject coverage for themselves, and the division keeps a record of those rejections. Its search screen allows interested parties to search for evidence of rejection of workers’ compensation coverage, and the division warns that contracting with an employer who has not properly rejected coverage could also leave you liable for an uninsured injury. The search page itself cautions that an empty result does not necessarily mean a rejection of coverage has not been filed, and that its information may contain errors or discrepancies.
The practical answer is a file. Before a subcontractor’s crew starts, collect a current certificate or the rejection paperwork, run the division’s search, and keep the result with the job. The post on what insurance GCs require from roofing subs shows how general contractors ask for the same proof from you.
Licensing is a city and county question
The state sources in this post are workers’ comp sources, and this post does not describe any statewide roofing license. For a commercial roofer, licensing questions start with the city or county where the building sits. Denver is one example of a city that runs its own contractor licensing. The City and County of Denver says a license applicant must hold a supervisor certificate or a state electrical or plumbing license, and it tells applicants who do not already have one to obtain a supervisor certificate first.
Other Front Range cities and counties can have their own rules, permits and proof of insurance requirements. Ask the building department for each jurisdiction where you work, and keep a list of which licenses and certificates each one holds on file for you. The Colorado location page covers the state picture.
Real-World Scenario: A Colorado commercial roofing company wins a re-roof on a retail center in a city where it has not worked before. The estimator assumes the license from its home city carries over. The building department asks for a local contractor license and a certificate of insurance naming the city before it will issue the permit. The owner calls the agent the same day, has the certificate issued, and starts the local license application while the crew waits.
Torch-down, hot asphalt and the fire exposure
Low-slope systems bring a fire exposure that steep-slope roofing does not. Torch-applied modified bitumen puts an open flame on the roof. Built-up roofing can involve kettles of hot asphalt. Even cold-applied and single-ply systems can involve hot-air welding and flammable adhesives. None of this is a Colorado legal requirement. It is general insurance explanation, and it is the first thing an underwriter can ask about on a commercial roofing account.
A fire that starts in insulation or a wood deck can smolder after the crew leaves, and the building under a commercial roof can hold tenants, inventory and equipment of real value. That is why insurers ask about fire watches, extinguishers on the roof, cool-down periods before leaving, and training for every crew member who handles a torch. Some general liability policies carry conditions or exclusions for hot work. The post on torch-down and hot work fire risk explains how those terms work, and fumes or adhesives that drift into a building are a pollution question to ask us about.
Leaks over occupied buildings
A commercial flat roof covers a business that keeps running underneath it. A leak during a re-roof, or after the job closes, can reach stock, electronics, finishes and the tenant’s operations. That is the completed operations exposure on the general liability policy, and it can be large on a commercial building.
The post on whether general liability covers a roof leak explains how that coverage responds, and the post on the your work exclusion explains why repairing the roof itself is a separate question from the damage the water causes. Dry-in practices matter here: tear off only what can be covered the same day, check the forecast, and record the steps the crew took. The general liability coverage page covers the policy in full.
Storms add a second layer. When hail or wind damages commercial roofs across a metro area, a roofing company can take on more work than it planned for. Report that growth to your agent during the term, because payroll and revenue drive the audit, and the account an underwriter priced should match the company that is actually working.
Contracts, limits and umbrella coverage
Commercial contracts can ask for more than a residential customer ever will. Expect requests for additional insured status, a waiver of subrogation, primary and noncontributory wording and specific limits. The post on additional insured status for roofers explains what those requests involve. Larger projects can ask for an umbrella above the general liability, auto and employer’s liability limits, and the umbrella coverage page explains how that layer works.
Some projects use a wrap-up program, where the owner or general contractor arranges insurance for everyone on the site. A wrap-up changes which policy responds to what, and it can exclude the project from your own policy. Read the enrollment paperwork with your agent before the job starts. The commercial and industrial roofing page describes how commercial operations are presented to underwriters.
Kettles, hoists and the trucks that carry them
A commercial flat roofing company can own equipment a residential crew never touches: asphalt kettles and tankers, material hoists, roof carts, vacuum and power sweepers for ballast and gravel, welders for single-ply seams, and trailers to move all of it. Equipment that travels between jobs belongs on a contractors equipment schedule, and the contractors equipment page explains how that coverage is set up. A kettle towed behind a truck is also an auto question, so make sure the trailer and the vehicle pulling it are both listed.
Cranes deserve their own conversation. If you hire a crane to set rolls, insulation or rooftop units, the rental or lift agreement can assign responsibility for damage and injury in ways that surprise an owner. Read it before the lift date, send it to your agent, and confirm which policy answers if a load drops onto the parking lot below.
Questions to ask before a Colorado commercial job
- Does my workers’ comp policy cover every employee, including seasonal and part-time laborers?
- How do I verify each subcontractor’s coverage or rejection, and where do I keep the proof?
- Which local licenses does each city or county on my job list require?
- What does my general liability policy say about hot work, and what fire watch practices does the insurer expect?
- Are fumes and adhesives a pollution exposure I need to address?
- Does this contract ask for endorsements, limits or an umbrella I have not arranged?
- Is this project in a wrap-up program, and how does that change my own coverage?
The Colorado cost guide explains what moves a roofing premium in the state. When you are ready for a review, start on the quote page.
Sources: the Colorado Division of Workers’ Compensation’s main page, its publications page and its rejection of coverage search, and the City and County of Denver’s contractor licenses page. This post is general education, not legal or tax advice.